Cisco Embedded Wireless Controller on C9105AX Access Point

The Catalyst 9105 Access Points expand Cisco’s intent-based network and are ideal for networks of all sizes. They scale to meet the rising demands of IoT while fully supporting the most recent advancements and new technologies.
The Catalyst 9105 is available with many mounting options, including the Catalyst 9105i, which can be attached to the ceiling using a bracket that has been specially made for the purpose, or it may be set up on a desk. The Catalyst 9105w is made specifically to be attached to walls and is perfect for lodging facilities, dorms, and other multi-dwelling structures. The majority of IOT devices and Wi-Fi compliant gadgets are now connected via Wi-Fi. We are more reliant on the wireless network than ever before because the majority of apps are network-dependent, bandwidth-intensive, and latency-sensitive.

Description

Specifications

Item Specification
C9105AXI-EWC-x: Cisco Catalyst 9105 Series
Regulatory domains: (x = regulatory domain)
Customers are responsible for verifying approval for use in their individual countries. To verify
approval and to identify the regulatory domain that corresponds to a particular country, visit
https://www.cisco.com/go/aironet/compliance.
Not all regulatory domains have been approved. As they are approved, the part numbers will be
available on the Global Price List and/or regional price lists.
Cisco Wireless LAN Services
● AS-WLAN-CNSLT: Cisco Wireless LAN Network Planning and Design Service
● AS-WLAN-CNSLT: Cisco Wireless LAN 802.11n Migration Service
● AS-WLAN-CNSLT: Cisco Wireless LAN Performance and Security Assessment Service

Accessories
● Mounting bracket: AIR-AP-BRACKET-W4= (available as spare)
● Spacer kit: C9105AXW-KIT (sold separately)

Software Catalyst 9105 AXI
● Cisco Unified Wireless Network Software Release 8.10.MR3 or later
● Cisco IOS XE Software Release 17.3.1, or later
Catalyst 9105AXW
● Cisco Unified Wireless Network Software Release 8.10MR3 or later
● Cisco IOS XE Software Release 17.3.1 or later

Supported wireless LAN controllers
● Cisco Catalyst 9800 Series Wireless Controllers
● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller

802.11n version 2.0 (and related) capabilities
● 2×2 MIMO with two spatial streams
● Maximal Ratio Combining (MRC)
● 802.11n and 802.11a/g
● 20- and 40-MHz channels
● PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC
Service Data Unit (A-MSDU) (transmit and receive)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic Shift Diversity (CSD) support
802.11ac ● 2×2 downlink MU-MIMO with two spatial streams
● MRC

● 802.11ac beamforming
● 20-, 40-, 80- MHz channels
● PHY data rates up to 866.7 Mbps (80 MHz with 5GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
● WPA3 support

802.11ax
● 2×2 uplink/downlink MU-MIMO with two spatial streams
● Uplink/downlink OFDMA
● TWT
● BSS coloring
© 2021 Cisco and/or its affiliates. All rights reserved. Page 7 of 14
Item Specification
● MRC
● 802.11ax beamforming
● 20-, 40-, 80- channels
● PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
● WPA3 support

Integrated antenna Catalyst 9105AXW
● 2.4 GHz: Peak gain 3 dBi, internal antenna
● 5 GHz: Peak gain 5 dBi, internal antenna
Catalyst 9105AXI
● 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
● 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth

Interfaces Catalyst 9105AXW
● 1x 100/1000/2500 Base-T (Ethernet) Uplink Interface
● 3x 10/100/1000 Base-T (Ethernet) Downlink Interface (LAN1,LAN2 and LAN3, LAN1 supports 10.5W PSE
Power Budget)
● Management console port (RJ-45)
● USB 2.0 at 4.5W
● Passthru Port

Catalyst 9105AXI
● 1x 10/100/1000 Base-T (Ethernet) Uplink Interface
● Management console port (RJ-45)
Indicators ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot
loader errors

Dimensions(W x L x H)
● Access point (without mounting brackets):
◦ C9105AXW: 3.54 x 6.3 x 1.3 in. (90 x 160 x 32.66 mm)
◦ C9105AXI: 5.9 x 5.9 x 1.18 in. (150 x 150 x 30 mm)

Weight Cisco Catalyst 9105AXW
● 0.8 lb. (373.2g)
Cisco Catalyst 9105AXI
● 0.7 lb. (329.5g)

Input power requirements
● 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE)
● Cisco power injector, AIR-PWRINJ6=
● 802.3af PoE
● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)

Reviews

There are no reviews yet.

Be the first to review “Cisco Embedded Wireless Controller on C9105AX Access Point”

Shop