Shop

Description

Specifications

Main features

Product Description Cisco Catalyst 9120AXE – radio access point
Device Type: Radio access point
Form Factor External – indoor
RAM: 2 GB
Flash Memory: 1 GB
Data Link Protocol: IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2, Bluetooth 5.0, IEEE 802.11ax (Wi-Fi 6)
Frequency Band: 2.4 GHz, 5 GHz
Power Over Ethernet (PoE): Supported UPOE
Dimensions (WxDxH): 21.6 cm x 21.6 cm x 5.1 cm
Weight: 1.36 kg

Extended details

General

Device Type: Radio access point
Ruggedized Design: Indoor
Width: 21.6 cm
Depth: 21.6 cm
Height: 5.1 cm
Weight: 1.36 kg

Processor / Memory / Storage

RAM: 2 GB
Flash Memory: 1 GB
Networking
Form Factor: External
Connectivity Technology: Wireless
Line Coding Format: OFDMA
Data Link Protocol: IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2, Bluetooth 5.0, IEEE 802.11ax (Wi-Fi 6)
Network / Transport Protocol: IPSec, IPv6
Remote Management Protocol: NETCONF, RESTCONF
Frequency Band :2.4 GHz, 5 GHz
Status Indicators: Status
Features: DFS support, Access Control List (ACL) support, Quality of Service (QoS), Maximum Ratio Combining (MRC), Wireless Intrusion Prevention System (WIPS), Cisco VideoStream technology, radio resource management (RRM), cyclic shift diversity (CSD), beamforming technology, packet aggregation A-MPDU, packet aggregation A-MSDU, Pre-Shared Key (PSK), Dynamic Frequency Selection (DFS), Dynamic QoS, guest access, secure boot, 4×4:4 MU-MIMO technology, Target Wait Time (TWT), image signing, Cisco Trust
Anchor module
Encryption Algorithm AES, TLS, PEAP, TTLS, WPA, WPA2, FIPS, EAP-SIM, EAP-FAST
Authentication Method MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST, EAP-SIM
Compliant Standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.11d, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11n, IEEE 802.3at, IEEE 802.11ac Wave 2, IEEE 802.3bz, IEEE 802.3bt, IEEE 802.11ax, Wi-Fi CERTIFIED 6

Aerial

Antenna: External detachable
Internet of Things (IoT)
Internet of Things (IoT) Compatible: Yes
Communications Technology: Bluetooth Low Energy (LE)

Expansion / Connectivity

Interfaces: 1 x 1/2.5GBase-T – RJ-45 ¦ 1 x management – RJ-45 ¦ 1 x USB 2.0 ¦ 4 x aerial

Miscellaneous

Compliant Standards: CISPR 24, EN 61000-3-2, ICES-003, EN 61000-3-3, EN55024, AS/NZS 60950-1, RSS-102, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, AS/NZS 4268, FCC CFR47 Part 15 C, FCC CFR47 Part 15 B, VCCI V-3, EN 62209-1, SRRC, EN 300 328, CNS 13438, EN 50385, EN 62209-2, EN 60601-1-1, EN 301 489-1, LP0002, RSS-247, KN32, AS/NZS CISPR 32 Class B, USGv6, TCVN 7189, EN 301 893, CISPR 32, EN 55032, CAN/CSA-C22.2 No. 60950-1, EN 55035, EMI Class B, EN 301 489-17, AS/NZS 2772, ARPANSA, KN 61000-3-2, KN 61000-3-3, KN 489-1, QCVN, KN 489-17, RSP-100, RSS-GEN

Power

Power Over Ethernet (PoE) Supported: UPOE

Software / System Requirements

Software Included: CAPWAP Software Image

Manufacturer Warranty

Service & Support: Limited warranty – lifetime

Environmental Parameters

Min Operating Temperature: -20 °C
Max Operating Temperature: 50 °C
Humidity Range Operating: 10 – 90% (non-condensing)