Shop

Cisco Catalyst 9300L 24p PoE, Network Essentials ,4x10G Uplink

The Catalyst 9300 Series is optimised for Cisco StackWise technology, allowing for flexible deployment and nonstop forwarding with Stateful Switchover (NSF/SSO), resulting in the most resilient architecture in a stackable (sub-50-ms) solution. Cisco StackPower, which supplies high-density Cisco Universal Power over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports, is part of the highly resilient and efficient power architecture. The Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture is used in the switches, which not only safeguards your investment but also provides for greater scale and throughput. Cisco IOS XE with programmability is a modern operating system with increased security capabilities and Internet of Things (IoT) convergence.

Description

C9300L-24P-4X-E Technical Specifications

Capacity
Type :ACL scale entries
Type :IPv4 routes
Value :32000
Type :IPv6 routes
Value :16000
Type :Multicast scale
Value :8000
Type :QoS scale entries
Value :5120
Type :Switched virtual interfaces (SVIs)
Value :1000
Type :VLANs supported
Value :4094
Dimensions & Weight
Depth :1.7 in
Height :19.2 in
Weight :15.01 lbs
Width :17.5 in
Environmental Parameters
Humidity Range Operating :5 – 90% (non-condensing)
Humidity Range Storage :5 – 90% (non-condensing)
Max Operating Temperature :113 °F
Max Storage Temperature :158 °F
Min Operating Temperature :23 °F
Min Storage Temperature :-40 °F
Flash Memory
Installed Size :16 GB
Header
Brand :Cisco
Edition :Network Essentials
Manufacturer :CISCO DS HARDWARE DIRECT
Model :9300L
Packaged Quantity :1
Ethernet Technology: Gigabit Ethernet
Product Line :Cisco Catalyst
Interface Provided
Comments :Uplink
Connector Type :SFP+
Qty :4 SFP+
Type :10GBase-X
Connector Type :RJ-45
PoE Power :505 W
Qty :24
Type :1000Base-T
Qty :1
Type :Network stack device
Type :Console
Type :Management (LAN)
Type :USB 2.0
Miscellaneous
Color Category :Gray
Compliant Standards :AS/NZS 3548 Class A, AS/NZS 60950-1, BSMI Class A, CAN/CSA-C22.2 No. 60950-1, CCC, CISPR 22 Class A, CISPR 24, CISPR 32 Class A, CISPR 35, CNS 13438, EN 300386, EN 55022 Class A, EN 55032 Class A, EN 60950-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN55024, FCC CFR47 Part 15 B Class A, ICES-003 Class A, IEC 60950-1, KN32, KN35, RoHS 5/6, TCVN 7189 Class A, TCVN 7317, UL 60950-1, V-3 Class A, VCCI Class A
Encryption Algorithm :128-bit AES, 256-bit AES
MTBF :340,710 hours
Networking
Advanced Switching :Layer 3
Compliant Standards :IEEE 1588v2, IEEE 802.1ae, IEEE 802.1BA, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad (LACP), IEEE 802.3u, IEEE 802.3x, IEEE 802.3z, Wi-Fi CERTIFIED 6
Features :802.1x authentication, Access Control List (ACL) support, Blue Beacon LED, Cisco StackWise-320 technology, Cisco Trust Anchor module, Cisco Unified Access Data Plane (UADP) 2.0, Class of Service (CoS), Committed Information Rate (CIR), Control plane protection (CoPP), DiffServ Code Point (DSCP) support, Energy Efficient Ethernet, First Hop Security (FHS), Flexible NetFlow (FNF), MACsec support, Protocol Independent Multicast (PIM), PVLAN support, PXE support, Quality of Service (QoS), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Secure boot, Shaped Round Robin (SRR), Zero-touch provisioning (ZTP)
Form Factor :Rack-mountable
Jumbo Frame Support :9198 bytes
MAC Address Table Size :32000 entries
Manageable :Yes
PoE Budget :505 W
Ports Qty :24
Power Over Ethernet (PoE) :PoE+
Remote Management Protocol :CLI, gRPC, IPv4, IPv6, NETCONF, RESTCONF, RMON 1, RMON 2, SNMP 1, SNMP 2c, SNMP 3, YANG
Routing Protocol :EIGRP, EIGRP for IPv6, MSTP, OSPF, OSPFv3, PIM-SM, PIM-SSM, Policy-based routing (PBR), RIP-1, RIP-2, RIPng, VRRP
Stackable :Stackable
Status Indicators :Status
Subcategory :Network hubs and switches
Subtype :Gigabit Ethernet
Type :Switch
Performance
Type :Forwarding rate
Value :95.23 Mpps
Type :Forwarding rate with stacking
Value :333.33 Mpps
Type :Switching capacity
Value :128 Gbps
Type :Switching capacity with stacking
Value :448 Gbps
Ports
Qty :24
Type :10/100/1000 (PoE+)
Ports (2nd)
Qty :4
Type :Gigabit SFP (uplink)
Power Device
Frequency Required :50 – 60 Hz
Hot-Plug :Hot-plug
Installed Qty :1
Max Supported Qty :2
Nominal Voltage :AC 120/230 V
Power Provided :715 Watt
Power Redundancy :Optional
Type :Internal power supply
RAM
Installed Size :8 GB

Reviews

There are no reviews yet.

Be the first to review “Cisco Catalyst 9300L 24p PoE, Network Essentials ,4x10G Uplink”

Your email address will not be published. Required fields are marked *

    Product categories
    Cart
    ×

    Hello!

    Click one of our representatives below to chat on WhatsApp or send us an email to marketing@sysllc.com

    × How can I help you?