Description
Specifications
Product Description: Catalyst 9300 48-port fixed uplinks UPoE, 12xmGig, 4X10G uplinks, Network Essentials
FRU Power Supply: Yes
FRU Fans: Yes
Modular Uplinks: No
Stacking Bandwidth Support: 320 Gbps
Cisco StackPower: No
Catalyst 9800 Embedded WLC: Yes (50 APs)
SD-Access Support: Yes (256 Virtual Networks)
Total 10/100/1000,Multigigabit copper or SFP Fiber: 48 UPoE 12xmGig
Uplink Configuration: 4x 10G fixed uplinks
Default AC power supply: 1100W AC
Available PoE power: 675W
Total number of MAC addresses: 32,000
Total number of IPv4 routes (ARP plus learned routes): 32,000 (24,000 direct routes and 8000 indirect routes)
IPv6 routing entries: 16,000
Multicast routing scale: 8,000
QoS scale entries: 5,120
ACL scale entries: 5,120
Packet buffer per SKU: 16 MB buffer for 24 and 48 port Gigabit Ethernet models
FNF entries: 64,000 flow on 24- and 48-port Gigabit Ethernet models
DRAM: 8 GB
Flash: 16 GB
VLAN IDs: 4094
Total Switched Virtual Interfaces (SVIs): 1000
Jumbo frames: 9198 bytes
Total routed ports per Catalyst 9300 Series stack: 416
Switching capacity: 392 Gbps
Switching capacity with stacking: 712 Gbps
Forwarding rate: 291.66 Mpps
Forwarding rate with stacking: 529.76 Mpps
Dimensions (H x W x D) Cms
Chassis only: 4.4 x 44.5 x 40.9
W/ Default Power Supply: 4.4 x 44.5 x 48.8
W/ 1100W Power Supply: 4.4 x 44.5 x 48.8
Mean Time Between Failures–MTBF (hours): 273,820
Connectors and cabling
• 1000BASE-T ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling
• Multigigabit-T ports: RJ-45 connectors, 4-pair Cat 5E, Cat 6, Cat 6A UTP cabling
• 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling
• SFP transceivers: LC fiber connectors (single-mode or multimode fiber)
• SFP+ transceivers: LC fiber connectors (single-mode or multimode fiber)
• QSFP+ transceivers: MPO and LC fiber connectors (single-mode or multimode fiber)
• QSFP+ connector
• SFP+ connector
• Cisco StackWise stacking ports: copper-based Cisco StackWise cabling
• Cisco StackPower: Cisco proprietary power stacking cables
• Ethernet management port: RJ-45 connectors, 4-pair Cat 5 UTP cabling
• Management console port: RJ-45-to-DB9 cable for PC connections
Power connectors
• Customers can provide power to a switch by using the internal power at the back of the switch
• Internal power supply connector: The internal power supply is an auto-ranging unit. It supports input
voltages between 100 (115 for 1100WAC) and 240 VAC. Use the supplied AC power cord to
connect the AC power connector to an AC power outlet
Safety certifications
• UL 60950-1
• CAN/CSA-C222.2 No. 60950-1
• EN 60950-1
• IEC 60950-1
• AS/NZS 60950.1
• IEEE 802.3
Electromagnetic emissions certifications
• 47 CFR Part 15
• CISPR22 Class A
• EN 300 386 V1.6.1
• EN 55022 Class A
• EN 55032 Class A
• CISPR 32 Class A
• EN61000-3-2
• EN61000-3-3
• ICES-003 Class A
• TCVN 7189 Class A
• V-3 Class A
• CISPR24
• EN 300 386
• EN55024
• TCVN 7317
• V-2/2015.04
• V-3/2015.04
• CNS13438
• KN32
• KN35
• IEC 61000-6-1
• EN 61000-6-1
Additional Certifications for C9300L SKUs:
• QCVN 118:2018/BTTTT
• CISPR24/25
• CISPR 32 Class A
• VCCI-CISPR 32 Class A
• EN55035
Environmental: Reduction of Hazardous Substances (ROHS) 5
Reviews
There are no reviews yet.